released Chevrolet Camaro Z28 Supercharger physics

[edwin]

I cannot put this in the physics section, please can a mod move it to physics.

Chevrolet Camaro Supercharger physics [1.0]

Converted by: Edwin

Credits: 3D Model, Wheels & Interior -Atari and StarGT

http://forum.turboduck.net/attachment.php?attachmentid=14263&stc=1&d=1290451040

I have made physics for

this Chevrolet Camaro Z28 Supercharger.

 

The physics are changed a lot to make the car behave more like a dragster.

The Brake Horsepower is increased to 600. The Torque is increased to 900 nm and the weight is lightend to 1300 kg. The Acceleration is set to 230 and the right height is also changed (rear up to 300 and front down to 150). Also the gearbox is changed to 3 gears instead of 4 (the real topfuel dragsters also use 3 gears according to the internet). Furthermore some minor changes.

 

U have to use the hardcore mode to make a wheely. Also U can use a launch control in the level 3 car (also used in the real dragsters). To use the launch control throttle up, holding the brake. Then step off the gas and the throttle will stay at about 5000 rpm. Let go of the brake (the car remains stationary) and hit the gas to take off!

 

 

To give a speed comparison take a look at this! 1.0s 0-60Mph just like a real dragster.:cool:

http://forum.turboduck.net/attachment.php?attachmentid=14275&stc=1&d=1290626729

 

The fast version level 3 Ferrari F1 need twice the time to get to 60 Mph!

http://forum.turboduck.net/attachment.php?attachmentid=14276&stc=1&d=1290626734

 

!!Please make sure to backup your original files before installing this mod and read the included README file if there is one!!

LINKS REMOVED

 

Mod History

v1.0 - First release

 

Terms of use:

-------------

- Don't drink and drive :cheers:

[Sponge]

The reason why you can't post there is precisely that.

These physics are not allowed on our site (F1 physics, Drag Physics)

 

Any attempt at reinstating the links will be punished.

 

:locked: