Jump to content
We promise no intrusive ads, Please help keep the community alive
Consider supporting us by disabling your ad blocker / add to whitelist / purchasing VIP.

Record Breaking attempt Koenigsegg One:1 ends up breaking itself


TurboDuck

Recommended Posts

[headline]Record Breaking attempt Koenigsegg One:1 ends up breaking itself[/headline]

Koenigsegg-One1-Nurburgring-Crash_20160718-800x300.jpg

 

They say you cannot make an omelette without breaking some eggs. Well it turns out you cannot break the Nurburgring lap record without breaking some Koenigseggs! (ba dum tss)

 

Puns aside, this one One:1 that had been running laps in preparation for an attempt to take away the production lap record from the Porsche 918 Spyder has had a...

 

Read more on this...

Link to comment
Share on other sites

Yes, because Koenigsegg released an official statement on their own facebook page about it. It was a test car, and it was driven by one of the factory test drivers who was brought to hospital by standard procedures but was released quickly after.

 

Koenigsegg Automotive AB can confirm reports online that a Koenigsegg One:1 was involved in a crash during testing as part of Industry Pool at the Nurburgring on Monday, 18 July. The driver was taken to hospital as per standard procedures in such situations and was released the same afternoon.

 

Koenigsegg has participated in Industry Pool testing for a week in each of the last two months, working primarily on vehicle setups both for ongoing vehicle development and for an attempt at a Nurburgring lap record at some time in the future.

A Koenigsegg is an extreme performance car and must be tested accordingly. This is an inherently dangerous undertaking that must be conducted progressively and methodically, working point by point on all areas of our highly adjustable vehicles. Our primary concern is always driver safety and any testing is structured and conducted accordingly.

This incident is confirmation of just how difficult it is to drive at this level on the world’s ultimate proving ground. Obviously we are dismayed with this development but pleased that our safety systems worked as designed to protect our driver.

Link to comment
Share on other sites

@CLR: That's not entirely clear either but after further searching I found that this car is Koeni's own and was apparently bought from the private owner last year.

I could tell from the metal roll cage that could be seen through the open door, the only One:1 that has one is the Koenigsegg test car.
Customer cars have been fitted out for testing purposes before though, in fact in recent terms wasn't there a private test mule used for one of the Bugatti Veyron iterations?
Link to comment
Share on other sites

I don't see why it's not at all clear but ok, maybe I'm just applying the wrong common sense to the story then that Industry-Pool means industry-only with full responsibility and insurances at the manufacturer, something that's not the case with a privately owned vehicle that will most likely have been modified to get road approval.

Link to comment
Share on other sites

Why I say it's not clear is because all it says is "testing" and "tested" in places and nowhere is there a simple 'the car which is factory owned' type mention. Unless I am missing something with the Industry Pool in some way determining only factory cars being allowed?

 

Help me out here. Where is it obvious in that admittance that the car is owned by them? It's not that I don't believe you, I'm just wanting to see what I missed in the text.

Link to comment
Share on other sites

Don't all manufacturers who test at the 'ring use 'test vehicles' (however each classifies them)? Otherwise @Koenigsomelette wouldn't have responded at all. Not that it really impacts your story.

 

Grammar needs some attention though. :)

Being that there is only seven One:1’s in existence
Link to comment
Share on other sites

Here it is: the crashed Koenigsegg was One:1 number #107. It was delivered to a german customer in 2014 but bought back by Koenigsegg. They will rebuild it, btw.

 

Little wonder, ofcourse they need special insurance and legal conditions to meet before they participate in Industry Pool. And you can't get that done with a privately owned vehicle under regular insurances.

Link to comment
Share on other sites

I can't make it clearer that you can't enter industry pool manufacturer sessions with a customer owned road-insured vehicle. That's just common sense plus a little bit of knowledge I have from my Spyker job and a colleague who did certification for them. Test vehicles need special documenation and insurances and the manufacturers need to comply with special regulation before they can get such an approval for a car. It's not as easy as getting your Big Brother label on a car and you're suddenly able to floor it anywhere you want. Let alone a customer who pays so much money for a car, only to not drive it himself but have it filled with measuring equipment all over the place and have somebody else flat it out on a track. Kind of silly would that be.

 

I never stated the info in my last post was in the press release. It was stated by a dutch source. Also, the license plate is not german but swedish, since the german plate was D FU 107. Just by typing Koenigsegg #107 in google gives you more than enough info. Also:

 

107 - One:1 Clear CF Gold? - Page 4 - BMW M5 Forum and M6 Forums

 

2014 Koenigsegg CCX (YAK136), Svart / 1366 hk på biluppgifter.se

 

Agreed it's not the same license plate as visible on the pictures, I assume there are some exemptions or possibilities there for small manufacturers. Also a quote:

 

The vehicle is owned by Koenigsegg Automotive AB, a company from Angelholm, it was bought seven months ago. There are 10 pieces of vehicles registered to the same user.
Link to comment
Share on other sites

I never stated the info in my last post was in the press release. It was stated by a dutch source.
THIS IS WHY!

 

Many times I referenced what Koenigsegg said and you kept posting quotes that I couldn't find said by them. The info you have shared above is what I found out after seeing what TDUFREAK500 said and hence I made the change to the article. But the way you were talking it sounded like this wasn't even needed as Koenigsegg had already admitted it somewhere.

Link to comment
Share on other sites

Sorry for being unable to smell what you have and have not found on the internet. But then it still leaves me with some questions:

 

So, the info I shared above is what you found out. You voiced doubts about it being a manufacturer testing vehicle. Where does it state that #107 was privately owned by a customer on the date of the crash? If you see those links to the swedish registration database, you can see it's been bought back by Koenigsegg. Why do you still have to question it's current form of ownership then? It's owned by Koenigsegg, not by a customer.

Link to comment
Share on other sites

There must be a language barrier issue or something going on here as it should be completely clear what happened and why there was confusion through all this. I was going to break it down but there's really no point.

 

All I will say is, if you cannot make out what happened after post #6 then just please stop.

Link to comment
Share on other sites

Just a typical press release really, trying to make sure the reputation of the company isn't in danger and that any future sales aren't affected.

 

Basically you come away from reading a press release about a car which had a failure and had a fairly dangerous crash thinking 'wow! that car is very well engineered, what a great company' :p Very impressed that they're rebuilding it using a lot of the same underpinnings.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...