released Some of Reilsss's stuff

[Cipo]

This McLaren F1 GTR Version does not exesist huh? I guess you have to think and start all over again......

 

 

Windowed mode? You could and should know (its noting new at all)... Tdu.exe -w

 

 

Ok ok calm down dude... I forgot about the Longtail-Version. There is no need to start being aggressive.

[MapleCars]

plz release it.....

[sanrevo]

plz release it.....

 

 

Didn't you see he said there was a problem ? Don't rush him for the release it is his mod and it is his decision on when the mod can be released .

[RRacer]

i'll keeep waching your steps you're a pretty good modder

[Reilsss]

I kinda like the latest update of the ZModeler Plugin, it allowed me to do a bounce of things that I wanted to do in the first line.

 

This brings me closer to the idea I could relase something as soon I find time to write proper readme files with insructions (saddly work drains me mostly away from doing that type of stuff)

 

But here a few updates / upgrades:

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/spoilers3.jpg

Königsegg CCR with the optional spoiler founded in the 2003 CC / CC8S

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/f1-1.jpg

Of corse CC8S cares as well this optional Spoiler. if you never saw it on a CC8S, try to google for the 2000 Königsegg CC (no 8S, R or X) you should find the frist silver one or a latter red one with carbon spoiler as prove

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/f1gtr.jpg

McLaren F1 GTR and F1 LM bugfix (Frontwindow banner points now in both directions (outside and inside the car. To fix the hole the F1 LM Dashview was suffering with. It also allows now to use the normal F1 dashboard in either car for a more normal interior (had befor a fat hole because the F1 misses a banner at all)

(The F1 dashboard to F1 GTR dashoard grpahic changes are from somebody in the forum, but this shows that a normal F1 Dash would work too (3d model wise)

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/20090111021844.jpg

Googling hard enogth will show you that there are a handful McLaren F1 cars out there that care a F1 GTR / LM rearspoiler. As well as a GTR like frontsplinter. I could not chaing the frontsplinter sinces it made to many holes in the F1 body. But the spoiler worked very fine.

 

http://s174.photobucket.com/albums/w93/Reilsss/TDUPictures/th_mcf1gt-1.jpg

I always wanted a normal looking Audi TT. It tooke a lot of work to make the black parts to car color. But I won after all.

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/512fixed.jpg

Bugfixes fro the 512TR, it finally has a shadow inside the garage and other indoor places. It also fixes the shadow with showed popuped ligths even when they where not poped up.

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/edolambo.jpg

I got Mapleser LP640 Texture mod for the Murcie, and tryed to make it look liked the Edo LP640. This means I had to add a Diablo SV like spoiler to the rear. (Rims by tool, lp640 textures by Mapler, 3d changes by me)

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/gallardoSE.jpg

A quick project I started yesterday and did in like 15 minutes only. A Gallardo SE to Gallardo Superlegera Modifcation. Means Mirrors and roof are now car color, and Superlegera Spoiler on the back. I know the orginal has carbon engine roof and carbon spoiler.. but I wanted it in car color...

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/Saleen.jpg

So many people run the car on stage 3, with reflects the Saleen S7 TT Competion perfomance, that I upgraded the model to look like the Competion variant.

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/mcf1gt-2.jpg

This gave me the intention to poke 3d models. Unlike my first version on page1, I got finally the correct rear wing genrated, and replaced the mirrors with standart McLaren F1 mirrors. This is not correct when you compare irl photos. But it reflects now very well my 1:18 model from UTModells. (Rims are by Eden's Skyper but a perfect match to recreate my 1:18 model's look)

-- OLD IMAGE REMOVED (imageshack) --

 

Additonal do not ask for realse dates, I don't give them, it just makes me want to not relase anything if people can't wait. Its uploaded when readmes are done and yet I have not the time to write good onces.

 

Also I usual ignore requests, so you kinda do not need to write them.. we have a reuqest forum, go there!

 

Also don't act like a dummy, you can read and have intellegence. I expect you to use it when you answer. (leaning this to those that still ask for realse dates even when I pointed out that there are none)

[NitroBlueUK]

Great Job Dude This Pack Is Gonna Be Awesome +REP For The Hard Work

[MapleCars]

I kinda like the latest update of the ZModeler Plugin, it allowed me to do a bounce of things that I wanted to do in the first line.

 

This brings me closer to the idea I could relase something as soon I find time to write proper readme files with insructions (saddly work drains me mostly away from doing that type of stuff)

 

But here a few updates / upgrades:

 

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/spoilers3.jpg

Königsegg CCR with the optional spoiler founded in the 2003 CC / CC8S

 

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/f1-1.jpg

Of corse CC8S cares as well this optional Spoiler. if you never saw it on a CC8S, try to google for the 2000 Königsegg CC (no 8S, R or X) you should find the frist silver one or a latter red one with carbon spoiler as prove

 

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/f1gtr.jpg

McLaren F1 GTR and F1 LM bugfix (Frontwindow banner points now in both directions (outside and inside the car. To fix the hole the F1 LM Dashview was suffering with. It also allows now to use the normal F1 dashboard in either car for a more normal interior (had befor a fat hole because the F1 misses a banner at all)

(The F1 dashboard to F1 GTR dashoard grpahic changes are from somebody in the forum, but this shows that a normal F1 Dash would work too (3d model wise)

 

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/20090111021844.jpg

Googling hard enogth will show you that there are a handful McLaren F1 cars out there that care a F1 GTR / LM rearspoiler. As well as a GTR like frontsplinter. I could not chaing the frontsplinter sinces it made to many holes in the F1 body. But the spoiler worked very fine.

 

 

http://s174.photobucket.com/albums/w93/Reilsss/TDUPictures/th_mcf1gt-1.jpg

I always wanted a normal looking Audi TT. It tooke a lot of work to make the black parts to car color. But I won after all.

 

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/512fixed.jpg

Bugfixes fro the 512TR, it finally has a shadow inside the garage and other indoor places. It also fixes the shadow with showed popuped ligths even when they where not poped up.

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/edolambo.jpg

I got Mapleser LP640 Texture mod for the Murcie, and tryed to make it look liked the Edo LP640. This means I had to add a Diablo SV like spoiler to the rear. (Rims by tool, lp640 textures by Mapler, 3d changes by me)

 

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/gallardoSE.jpg

A quick project I started yesterday and did in like 15 minutes only. A Gallardo SE to Gallardo Superlegera Modifcation. Means Mirrors and roof are now car color, and Superlegera Spoiler on the back. I know the orginal has carbon engine roof and carbon spoiler.. but I wanted it in car color...

 

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/Saleen.jpg

So many people run the car on stage 3, with reflects the Saleen S7 TT Competion perfomance, that I upgraded the model to look like the Competion variant.

 

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/mcf1gt-2.jpg

This gave me the intention to poke 3d models. Unlike my first version on page1, I got finally the correct rear wing genrated, and replaced the mirrors with standart McLaren F1 mirrors. This is not correct when you compare irl photos. But it reflects now very well my 1:18 model from UTModells. (Rims are by Eden's Skyper but a perfect match to recreate my 1:18 model's look)

 

Additonal do not ask for realse dates, I don't give them, it just makes me want to not relase anything if people can't wait. Its uploaded when readmes are done and yet I have not the time to write good onces.

 

Also I usual ignore requests, so you kinda do not need to write them.. we have a reuqest forum, go there!

 

Also don't act like a dummy, you can read and have intellegence. I expect you to use it when you answer. (leaning this to those that still ask for realse dates even when I pointed out that there are none)

 

I would be happy if you make the front light, sticking out, like the Roadster one, and fix the bumper or make it to an LP640 one.

 

Btw, I have an updated one with the interior much nice, and rear light very clear.

 

EDIT: you spelled my name wrong "I got Mapleser LP640 Texture mod for the Murcie" ;)

[Sponge]

Did you really need to quote the whole post? lol

[MapleCars]

Did you really need to quote the whole post? lol

 

lol, I'm lazy to see to delete which one when I pressed quote post, so I just deleted the images.

[Reilsss]

my apolgize for misspelling your name Maplecars, it was not my intention.

For your suggestion / idea.. can you please point out on photos or pictures what you mean? rigth now im puzzling what you mean. And for adding LP640 eleemnts I'm not sure if that will work out great <..< I#m not so skilled as a Tool341 is.. and even he gave up on the LP640

[MapleCars]

First, what I most want is the light to be longer, like the roadster one.

http://i478.photobucket.com/albums/rr144/Maplecars/TestDriveUnlimited2009-01-1622-49-5.jpg

 

Then, maybe (If possible) make the rear lights down part flat so it can see the texture clearly.

http://i478.photobucket.com/albums/rr144/Maplecars/TestDriveUnlimited2009-01-1622-49-4.jpg

 

And some mics.

http://i478.photobucket.com/albums/rr144/Maplecars/TestDriveUnlimited2009-01-1622-50-0.jpg

remove the badge if possilbe

 

One exhuast:

http://i478.photobucket.com/albums/rr144/Maplecars/TestDriveUnlimited2009-01-1622-50-1.jpg

 

Transperent Engine cover

http://i478.photobucket.com/albums/rr144/Maplecars/TestDriveUnlimited2009-01-1622-50-2.jpg

 

I actually just want the first two.

 

 

 

EDIT: but if u really made it, can u lemme edit the texture? I really wanna contiune mod that car.

Thx for advice

[Shy Guy]

Can you lower the Challenger and remove the black roof, and remove the metal lines around the roof so it looks normal, would like to see the result, I'd test it for you :) :p

[Reilsss]

Can you lower the Challenger and remove the black roof, and remove the metal lines around the roof so it looks normal, would like to see the result, I'd test it for you :) :p

 

Theoretical I could do that but i puzzle why. The genral lee charger is already out and the model tdu has is definitly a diffrent one from that R/T.

 

Then i dunno when i have time to play tdu or poke around files.

[Tool831]

Yes but that a Charger not a Challenger.. They are different. ;) You may of knew that but yeah thought id share some light on that.

[Shy Guy]

The Challenger is a different model...

[Reilsss]

Bits of new stuff:

 

To get the Stripes from the roof would mean to get them away total....

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/Challenger.jpg

 

We could not have a F50 (best ferrari ever for me) so I thougth I give the enzo what it always was leaking... a F40/F50 like spoiler... choosed the F50 Style after all and enjoy the result.

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/EnzoF50.jpg

 

Idea for the Zondas comes from this: http://i22.photobucket.com/albums/b348/snorfenghorph/pagani_zonda_c12_07.jpg (C12 no S version from 99)

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/zondac12ROADSTER.jpg

 

http://i174.photobucket.com/albums/w93/Reilsss/TDUPictures/zondac12.jpg

 

Also I do not know if i will ever find the motivation to upload any of those <..< That "write a correct readme" always makes me not do it >..<

[Shy Guy]

The Challenger doesn't look right because of the metal around the roof.

[iBilo]

I love the F50 spoiler!

[Andreas¹]

Agreed, that F50 spoiler makes the Enzo look so much better :D

[Djey]

Good Job Reilsss, glad to see your projects going on ^^

[Reilsss]

@ Shy Guy: I'm quiet pleased with my result. Then you always can try to do better yourself I guess.

 

@ Rest: Thanks I guess, I guess that F50 spoiler idea isn't that bad, specialy sinces the F60 Prototype had something like that in a familar way. And it looks at last much better then what the FXX has. And indeed that spoiler comes nicely along with the F40 and F50 style of Special editon Ferrari.

 

For the Zonda I tryed to give the car a bit more the C12 (not S version) look. That spoiler does a big junk of work for that. (btw from the C12 where only 3 build as far I readed.. may the source was wrong.

[MapleCars]

+rep, hmm BTW I thought I've added you very long time ago.

[And3rs]

Nice mods there, did you make those Zonda rims yourself?

EDIT: No its tool's rims right?

[Reilsss]

Its not my rim, its not tools rim, its Eden's 3rd Zonda Fariation that got never used from the game. (just check the pagani folder and you find them.

[Porsche Carrera GT]

wow really nice Reilsss!

 

The Enzo looks really nice!!!:thumbsup::thumbsup::thumbsup:

 

greetings:

Porsche Carrera GT